APG Cash Drawer Setup on All-in-One Device

Follow

Table of Contents

Connecting APG Vasario Cash Drawer

Setting Up APG Vasario Cash Drawer

 

Overview

Before you can use the APG Vasario Cash Drawer on the All-in-One device, you will have to connect it to the device (or external printer) and set it up on eHopper. 

 

Connecting APG Vasario Cash Drawer 

1. Connect the cash drawer to the All-in-One device (or to Star or BTP printer if using one of those) via a RJ12 connector by inputting it into the cash drawer port on the back of the device. 

2. Turn on the device and the cash drawer should be ready to operate.

 

Setting Up APG Vasario Cash Drawer on POS

1. Log in to eHopper POS

2. In the left navigation menu, tap on Settings--->Cash Drawer

3. Tap Search for cash drawer.

4. In list that appears, select the printer that the cash drawer is connected to.

5. Tap the Test link to the right of the selected printer. If the drawer opens, it is properly set up. 

6. Confirm cash drawer settings by tapping DONE.

7. The cash drawer will open upon each transaction in POS. 

Was this article helpful?
0 out of 0 found this helpful

Comments