Setting up Poynt Set

Follow

Table of Contents

Initialization of Poynt Terminal

Initialization Star TSP100 LAN

Initialization Cash Drawer MS CF-405 w/media slots RJ12

 

1. Setup of Poynt Terminal

Switch your Poynt Terminal ON. The built-in equipment is already setup and is ready to use.

2. Setup Of Star TSP100 LAN

2.1 Connecting Star TSP100 LAN

  1. Connect Printer to power supply.
  2. Switch printer ON.

2.2 Setting Up Star TSP100 Printer as Receipt and Kitchen Printer in the eHopper Application

  1. Open eHopper application.
  2. Tap 'Printer Setup' in left navigation menu.

  3. On printer settings screen tap ‘Search for Printer’
  4. In the Receipt Printers list select Star TSP100 LAN printer to use for receipts
  5. Define the receipt paper width
  6. Print test page to be sure receipt printer is set up properly
  7. In the Kitchen Printers list select Star TSP100 LAN printer to use for kitchen receipts.
  8. Define the kitchen receipt paper width.
  9. Print test page to be sure kitchen printer is set up properly.
  10. To confirm your printer settings tap ‘DONE’.
  11. Printer is ready for usage in application.

3. Initialization Cash Drawer MS CF-405 w/media slots RJ12

3.1 Connecting Cash Drawer MS CF-405

  1. Connect Cash Drawer to the Star Printer via RJ12 connector. (You can use either Star TSP100 LAN or Star Bluetooth TSP650II Printer to connect Cash Drawer to)
  2. Cash Drawer is ready to work.

3.2 Setting up Cash Drawer MS CF-405 in the eHopper application

  1. Open eHopper POS.
  2. Select Cash drawer setup in left navigation menu.
  3. Tap ‘Search for Printer’.
  4. In the Printers list, select the printer the Cash drawer is connected to. Tap Open Cash Drawer Test to be sure cash drawer is set up properly.
  5. To confirm cash drawer settings, tap ‘DONE’.
  6. Your cash drawer is ready for use.
Was this article helpful?
0 out of 0 found this helpful

Comments