Cash Drawer MS CF-405 W/ Media Slots Setup


Table of Contents

Connect Cash Drawer MS CF-405 to Printer  

Setting Up Cash Drawer MS CF-405 in POS



Before you can use the Cash Drawer MS CF-405, you will have to connect it to your printer and set it up on eHopper. 



  • If using a Star printer, it should be turned on and set up with eHopper.
  • If using built-in Poynt printer (must have Freedom account), the Poynt power cord should be inputted to the right-most plug-in on the Poynt charging pad, the Poynt device should be placed on the charging pad, turned on, and then the built-in printer should be set up with eHopper. 


Connect Cash Drawer MS CF-405 to Star Printer

1. Connect cash drawer to Star Printer via RJ12 connector. (Can connect drawer to either Star TSP100 LAN or Star Bluetooth TSP650II printer). 

2. Cash drawer is ready to operate.


Connecting eHopper Cash Drawer to Built-in Poynt Printer

1. Input an Ethernet cord into the left-most plug-in on the Poynt charging pad.

2. Connect the USB Cash Drawer Trigger into one of the center plug-ins on the Poynt device and to the back of the cash drawer. 

3. If the Poynt device is on the charging pad, a notification should appear saying that the cash drawer was connected successfully. 

4. Select Test Cash Drawer to test that the cash drawer is working.

5. Select Open Drawer.

6. If drawer opened successfully, tap Yes. If not, tap No.


Setting Up Cash Drawer MS CF-405 in POS

1. Log in to eHopper POS

2. In the left navigation menu, tap on Settings--->Cash Drawer

3. Tap Search for cash drawer.


4. In the list that appears, select either the USB Trigger Cash Drawer (if using built-in Poynt printer) or the Star printer.

5. Tap Test link to the right of the selected printer. If drawer opens, it is properly set up. 

6. Confirm cash drawer settings by tapping DONE.

7. Cash drawer is ready for usage in application.

Was this article helpful?
0 out of 0 found this helpful