Star TSP100 LAN Printer Setup on Android


Table of Contents

Connecting Star TSP100 LAN Printer to Android

Setting Up Star TSP100 LAN Printer on POS 



Before you can use the Star TSPP100 Printer on your Android device, you will have to configure it and set it up with eHopper.  


Connecting Star TSP100 LAN Printer to Android

1. On the back of the printer, input the printer power source cord into the leftmost plug-in and plug it into to an outlet.

2. Input the ethernet router into the rightmost plug-in on the back of the printer.

3. Turn printer on by pushing down the "l" on the side of the printer.

4. Connect tablet to same wifi network as ethernet router that the printer is connected to. 


Setting Up Star TSP100 LAN on POS

1. Log in to POS.

2. In the left navigation menu, tap on Settings--->Printer Setup

3. On Printer Settings screen, tap Search for printer on the top right. 

4. The Star TSP100 LAN printer should show up under both Receipt Printers and Kitchen Printers. Check off the box(es) of whichever one(s) you would like to set up your printer to print.

Note: For kitchen receipts to print, you must select the Kitchen Receipt option in the Receipt tab of your Back Office Store Settings. 

5. Choose either 80mm or 58mm as the paper width for both printer types.

6. The option Print Test Page will appear to the right of the printer. Tap it to print a test page to ensure that the printer is set up properly.

7. Confirm your printer settings by tapping the DONE button. The printer should now be set up to work on your tablet. 

Was this article helpful?
0 out of 0 found this helpful